Ultra Flex 3D Puff 20” wide Heat Transfer Vinyl for T-Shirt and Apparel - HTV

• Thickness / Force: 33-38
• Blade: 6-8
• Print / Cut: Cut the design on the reverse side of the vinyl.
  Mirror or flip the artwork before sending it to the cutter.
  Cutting Conditions
• Plotter Machine: GCC Jaguar IV / Mimaki CJV150 75
• Cutting Direction: Reverse
• Force: 220gfs
• Speed: 15cm/s
• Blade: 60°

• Temperature: 300°F – 320°F
• Pressing time: 10-15 seconds under medium pressure.
• 2nd Press Time (OPTIONAL):  15 seconds 
• Pressure: Medium 
• Peel: Hot/ Warm

Recommendation: Always perform a test cut and press before standard production.
Note: Settings may vary depending on blade sharpness, garment material, and equipment used.

• Heat-activated foaming layer creates a bold, raised 3D effect.
• Adjustable puff height by changing heat press conditions.
• Available in both matte and metallic finishes.
• Compatible with stretchable fabrics without cracking.
• Adhesive backing supports clean cutting and easy weeding.
• Ideal for logos and graphics that require visual depth.Easy to cut and weed.
• Stable performance with consistent expansion results.